Furnace pre-furnace molten iron quality management instrument

KD-TS6 Furnace Pre-Furnace Molten Iron Quality Management Instrument (Pre-furnace Carbon-Silicone-Manganese Analyzer)

Main performance characteristics:

It adopts anti-electromagnetic interference, dust isolation and integrated design, which is easy to operate. There are eight testing lines, according to the actual situation of different grades of molten iron and the actual situation of molten iron in each factory, the appropriate testing line is selected, and the quality control requirements of casting production; Make up for the shortcomings that the spectrum cannot accurately measure non-metallic elements (C, Si), and the time requirements for conventional analytical instruments to complete the pre-furnace analysis.

Main parameters:

1. Measurement function: thermal analysis of gray cast iron and ductile iron.

2. Measurement parameters: determine the tensile strength of molten iron Rm, hardness HB, nodularity SG%

3. Measuring range: CE: 2.50~4.95% C: 2.10~4.50% Si: 0.30~5.00% Mn: 0.10~1.80% SG: 60~98%

4. Accuracy (%): Temp: ≤±1 °C CE: ± 0.05 C: ± 0.05 Si: ± 0.1 Mn: ± 0.1 SG: ±10

5. Working parameters: power supply AC 220V, 50Hz; The power is 80W, and the ambient temperature is 0~70°C

6. Measurement time: generally 1 minute and 30 seconds

7. Imported temperature sensor, brand LED display

Key features:

Eight target components can be set, and the measurement line and target components are linked; According to the measurement results, the amount of carburizer, ferrosilicon, scrap steel and ferromanganese is automatically calculated according to the target component, molten iron weight and yield; The results are automatically saved, and the test results can be queried and the waveform can be detected by time; The measurement records can be transferred to a USB flash drive and viewed on other computers.